Peek a Boo Tutorial by Davi Reid

Check out our newest tutorial on MFP SpeedyTV brought to us by the Tutorial Time on SpeedyTV Challenge. 

Peek a Boo Card

By: Davi Reid

Will need two pieces of paper of your choice

6 3/4” x 5 ½”

5 ½” x11”

1. Score the 6 3/4” piece at 4 ¼”
2. Score the 11” piece at 3 1/2 ” and7”

3. Run a bone folder along your folds
4. The 11” piece is folded like a z with the short
Side to the back.
5. Next use a 1 1/4” circle punch to punch a hold
On the 6 1/8 piece right up against the edge
Of the piece that was folded over.
I didn’t have the right size circle punch so
Used a die close in size but it did make it
Harder. I suggest using the circle punch if
You have it.

6. Next line up the edge of the 11” with the edge
Of the 6 1/8 and then line up the punch and punch
Thru the second piece, and again thru the layer
underneath that one.

7.Stamp whatever you want to go in the two openings
Onto another piece of paper.

8.On the front fold of the 11” cover it with
Your choice of adhesive. You will then adhere
The back side of the 6 1/8” to it making sure
You line up the right side of the papers soyour
Holes line up.


9.You will now open your card and the short fold
on the 6 1/8” move over behind the second hole.
Adhere the image of your choice in that window.

10. Now take an adhesive and run it down
The back inside fold of the 11” piece. It
Will be along side the back image. This
Keeps the sliding piece of the 6 1/8 piece
Inside and allows it to slide.

11.Now decorate your front and or inside as
Your want, and you now have a peek a boo card.
front of card


As you can see when you open the slider
Brings over the image into the window
Covering the first image.
Check out our newest tutorial on MFP SpeedyTV an our Tutorial Time on SpeedyTV challenge.

Be sure to check out our challenge next week with a new tutorial.